Danish-based Enkotec A/S officially releases its latest technological innovation, the thread rolling machine type TA01, at wire 2008 exhibition in Düsseldorf. The TA01 has been designed for making screw shank or annular nail profiles with a working area of Ø 1.8-4.2 x 32-105mm nail length and a profile height of 27-75mm.
New insertion principle: One of the innovative features of the new TA01 is the very accurate insertion principle. A specially designed nail injector, located in the transition between the feeding screw and the tooling, allows to straighten up and guide the nails into the profiling tooling in upright position. The constant quantity of nails engaged and the precise insertion of the nails into the tooling make it possible to obtain a very high and uniform profiling quality.
High production speed: The new nail insertion principle contributes to making it possible to profile the nails at a speed of up to 2,500 nails per minute, without affecting the production stability, no matter whether the profile chosen is screw shank or annular. The actual production speed is depending on the nail type, the profile type, and the feeding rate from the vibratory parts-feeder bowl, which is supplied as standard with the machine.
Fast tooling changeovers: In order to ensure high production efficiency, the TA01 has been designed to allow quick and easy tooling changeovers, so that it only takes approx. 30 minutes to change tooling.
Touch-screen user interface: The TA01 is controlled from a userfriendly touch screen on the control panel, where it is possible to choose the nail type (screw shank or annular), and from which the machine can be started and stopped, initialized, adjusted and monitored.
Low noise level: The machine includes covers over the process zone and around the circular feeder, protecting the user and reducing the noise level to approx. 87 dBA.
Exhaust ventilation: The TA01 is equipped with a connection to exhaust ventilation, which makes it possible to exhaust dust from the process zone and from the ejection area.


Stand 14 F01

Name:*

 

E-Mail:*

(Ihre E-Mail wird nicht veröffentlicht)

 

Kommentar:*

 

 

Absenden