The JET3 and JET3pi with 70µ nozzle enhances the wide range of inkjet units from Leibinger. So there is no limit to the application spectrum anymore. This new printer version of the JET3 and JET3pi is mainly suited for printing on big letters with high contrast between product and print. By the 70µ nozzle and a special geometry of deflection plates and printhead of the JET3 and JET3pi a bigger deflection of the ink drops can be achieved; therewith font sizes up to 15mm can be printed.
The application area of the JET3 and JET3pi with 70µ nozzle include now also porose and highly sucking products, where an increased amount of ink is necessary. The thicker drops by the 70µ nozzle and the use of pigmented inks by the JET3pi guarantee a strong contrast between product surface and print.
The automatic Leibinger nozzle seal guarantees also in this printer versions an immediate print start without flushing processes and cleaning procedures. When shut-down the machine the gutter tube closes the nozzle airtight and establish a closed ink circuit. This technique avoids also after long-term shut-downs drying ink.

Name:*

 

E-Mail:*

(Ihre E-Mail wird nicht veröffentlicht)

 

Kommentar:*

 

 

Absenden