Since the 30ies of the last century phosphated surfaces are used with growing success in primers and in cold forming processes. Based on what is known today, especially electrolytical phosphating offer in pass through devices decisive advantages like very short treatment duration, lower consumption of chemicals and lower operation temperatures. This allows considerable increase of productivity with reduced operating costs at the same time.

With more than 50 years experience as a manufacturer of spring end grinding machines, OMD Officina Meccanica Domaso is also specialized in the production of wet grinding machines for hot coiled...

With about six months until wire Southeast ASIA and Tube Southeast ASIA 2007 debut at Bangkok’s BITEC on 16 October 2007, the show organizer reports that already, 90% of available space has been booked. Particularly positive news is the fact that many companies that were absent when the show was last held—in Singapore in 2005 — will return this time around, reflecting their enthusiasm regarding the Thai market.

Pan Chemicals is an Italian producer of special drawing lubricants and coatings for ferrous-non ferrous and stainless steel wire and equipment for the wire industry.The production program...

After two years, MVTec Software GmbH, München/Germany, will launch the new version of its software library Halcon. It is fact that Halcon 8.0 will break new ground in functionality for industrial use...

The Wire & Plastic Machinery Corporation is located in Bristol Connecticut USA. With over 90,000sq meters of warehouse, they are one of the largest suppliers of used equipment in the world. The...

Zwick’s testing software testXpert II has been developed with a fully integrated option to meet the requirements of FDA 21 CFR Part 11. These guidelines, set by the US Food and drug...

Here in the state of Hesse in Germany many things are done without using heads, at least at the Hessische Schraubenfabrik hsf in Marburg. The enterprise has specialized on headless parts with diameters from M8 to M24. The move away from large series for the automotive industry and the positioning in this niche took place eight years ago. This step took a lot of courage at the time but in retrospective was one of the most important decisions made to escape the ruinous price competition in the automotive field and to ensure the survival of the fastener factory founded in 1947. Following this step the entire machinery has been modernized. Beside new cold forming for the production of blanks and CNC machines that are used to run special parts in stainless steel, for example, the production of threaded parts was successively moved from 2 and 3 roll machines to flat die machines, leading to significant improvement in productivity. Since 1988 hsf relies exclusively on E. W. Menn machines.

2007 will prove to be a very challenging year for all manufacturers. The implementation of Reach, and inordinate increases in the price of palm oil and beef tallow, the main raw materials of wire...

With its Siplace Maintenance Manager, Siemens Automation and Drives (A&D) has developed a new software system for electronics manufacturers that makes preventive maintenance easy by indicating...

The new plug-in relays of the Sirius LZS series from Siemens Automation and Drives (A&D) have a plug-in socket with push-in spring-loaded terminals and logical isolation. The push-in connection...

Thanks to a true spirit of partnership, Condat can now offer innovative products together with appropriate services.At wire Russia 2007, Condat will present new products designed to accommodate new...

Cold rolling oils have a significant influence on the rolling process and on the quality of the manufactured sheet and the demands made by the steel producers on such rolling oils are correspondingly high. Lubricant manufacturers are expected to produce cold rolling oils or emulsions which contribute to high steel quality, the best possible cleanliness, favourable lubricity and overall economy. The lubricant specialist Fuchs has formulated a rolling emulsion for Arcelor, the largest steel producer in Belgium, which fulfils all of these demands. Large scale plant trials were conducted to see if these promises were fulfilled.

WIRE: Dr. Bartz, this is the third time the wire Russia takes place. Have there been any significant changes compared to the fairs in 2003 and 2005? And how do you estimate the tendency of this trade...

The machine consists of a sturdy frame and a rosette-laying device, situated in the upper part of the machine. Here also the 4-Q,8,2kw main driver is mounted to the combined capstan and laying device...

At wire Russia 2007 Zumbach will again present many new developments and products. The following is a summary of the most important ones. Sensors: The advanced ODEX 10 concentricity and diameter...

Like in 2003 and 2005, Eder Engineering-Austria will have a large Stand at wire Russia 2007, located in the Austrian Pavilion again. Being active in the former USSR since 1956, Russia and the CIS....

Flawless diamonds are bringing in top prices, niche markets are booming and those companies backing quality rather than quantity are particularly successful. Vacuumschmelze GmbH & Co. KG (VAC) in Hanau, Germany can claim to possess all of these assets. For a long time the company has been making a name for itself in several sectors producing exclusive wire and spring alloys by sophisticated manufacturing techniques.

At wire Russia 2007 Medek & Schoerner will once again be presenting its range of cable marking equipment and optical fibre coding systems:- Top Performance Optical Fibre Colour Coding Systems,...

Two well known international companies supplying welding machines to service the wire industry will be jointly exhibiting and demonstrating their equipment in operation at wire Russia 2007....

Ebner-Industrieofenbau, Linz/Austria, designs and manufactures industrial furnaces for semi-finished products for the steel and non-ferrous industries. HICON/H2 bell type furnace annealing technology...

Recent testing performed by Solarflare Communications confirms that Siemon’s 10G 6A UTP, 10G 6A F/UTP and Category 7/Class F TERA copper cabling systems meet or exceed all 10GBASE-T performance parameters dictated by the now ratified IEEE 802.3an-2006 standard.

Messrs. August Strecker GmbH & Co. KG manufacturer of buttwelding equipment for the wire and cable industry for more than 70 years, will again participate in this year's wire Russia 2007...

WIRE: Let’s kick off with the usual question. Are you pleased with the exhibitor figures for wire Russia and how many buyers do you expect to welcome to the show?Jörg Dübelt: I am very...

AIM’s Accuform “E” series is the economical choice for the CNC steel wire bender industry. It offers functionality, ease of use, and a great value unmatched in the industry. The...

Carl Zeiss is adding with two new models to its line of entry-level digital cameras for photomicrography: the 1.4 megapixel AxioCam ICc1 and the 3.3 megapixel AxioCam ICc3. These cameras offer an...

Gauder Group designs and manufactures innovative machines for the wire, cable and fiber optic industries as well as provides resale equipment and a comprehensive range of services (with a specialized...

will appear in September with following topics

Wieland-Werke AG for the first time attends the wire Russia. Wieland exhibition focuses on copper alloy wire, made of bronze, brass, nickel silver and high copper alloys. Copper alloy wire is applied...